For transmitters shown, please telephone or call into our Showroom on the Isle of Man

Business Park.  Mail Order available to UK, United States, and Europe.  Just email your requirements, and we will contact you to confirm postage, payment via credit/debit card only for Non Isle of Man transactions.

Altronik S429-1, S429-2 433Mhz only    (12 Dip switch)

If customer has one working transmitter, cloning replacement available.  If there are no working transmitters, radio upgrade as above

Universal Cloning Transmitter          £48 & Vat

Apex 375 Transmitter, original case style as upper picture, new style direct replacement shown below.

Dip Switch transmitter, customer can code in with instructions

£55 & VAT & carriage each

8 Dip switch version, if you have one work working transmitter, we can now offer a cloned alternate

Mitto Handset, also available with 4 buttons, has to be programmed in by an engineer.  Note, this version is approx 62mm long, there is an older version which is approx 72mm long which takes Battery Type B

£42 & VAT each

BFT TEO2 Transmitter

Dipswitch transmitter, customer can code in with instruction sheet

BFT VTM2 Transmitter

Dipswitch transmitter, customer can code in with instruction sheet

Cardale DC650 868Mhx Handset

£49 & VAT

Cardale Autoglide III Handset (433Mhz)

This has 433 printed on the top left, the other versions are discontinued.  All blue versions are discontinued

Customer can code in with instruction sheet

Cardale Steeline 433Mhz

Cardale Steeline 433Mhz AZAR2058

If there is an existing, working transmitter, customer can code with instruction sheet

Note, compatible with non original above

Cardale Thermaglide

Cardale 418Mhz UKTX for  Autoglide II, early steeline & thermoline/thermoglide doors, Cordula and Nationwide
roller doors from approx.1995 to May 1998. 

Cardale 418Mhz AZAA1007 Autoglide II and early steeline & thermoline doors. 

NB this frequency was withdrawn 31.12.2007, stocks are likely to dwindle

These are also replaceable by universal cloning transmitter

£61 & vat & postage – Special Order

40.685Mhz Multicode handsets for Challenger & Cardale Euro operators (check frequency on transmitter)

Dipswitch transmitter, customer can code in with instruction sheet

40.685Mhz Mini Multicode handsets for Challenger & Cardale Euro operators (check frequency on transmitter)

Dipswitch transmitter, customer can code in with instruction sheet

Ditec BIXLS2 (10 dip switch)

If customer has one working transmitter, cloning replacement available.  If there are no working transmitters, radio upgrade

Garamatic Blue Spot Transmitter

Dip switch transmitter, customer can code in with instruction sheet

£59 & Vat (£67.85)

Transmitters discontinued a number of years ago, If operator seems in good condition, go for Radio Upgrade option.

Henderson/Sommer 40.685MHz two channel handset to suit early Henderson or Sommer; Marathon, Sprint and Duo garage door openers manufactured before July 2001 and Aperto models manufactured before March 2002.

868 Mhz = grey case with light blue buttons
40.685 Mhz = grey case with light grey buttons

HSM “mini” Case 4 button transmitter, customer can code in from existing transmitter

HS “Standard” Case 4 button transmitter, customer can code in from existing transmitter

(special order)

HSE “Micro” Case 2 button transmitter, customer can code in from existing transmitter

New keyring type transmitter 868MHz  only HSD2-A

Shown in High Gloss Chrome, also available in Aluminium

New cigarette lighter transmitter 868MHz  only HSZ1/2

Shown with one button, also available with 2 buttons

New Round 868Mhz only transmitter

HSP4 4 button

There are 3 slight variations of this transmitter:

26.975Mhz has 26975 marked on the back at the top
173.3Mhz has an orange sticker inside the battery door marked "GB"

These two types are discontinued, if operator is in good working order, go for the radio upgrade, along with Transformer

26.995Mhz has 26995 marked on the back at the top – Replacement transmitter available (HSM2) £57 & VAT

customer can code in from existing transmitter

Liftmaster one button transmitter

Available in 418MHz  & 433Mhz 

(Two required)

Micro Key Fob 313 868Mhz

can be coded in by customer using the cable & instructions supplied with transmitters

£55 & Vat  & carriage

Mini Key Fob 302 868Mhz

can be coded in by customer using the cable & instructions supplied with transmitters

Mini 5 button handsets 433Mhz, can be coded in by customer using the cable & instructions supplied with transmitters

Standard 2 button handsets 433Mhz, can be coded in by customer using the cable & instructions supplied with transmitters

Mini 4 button handsets 433Mhz, can be coded in by customer using the cable & instructions supplied with transmitters

MFZ transmitter 433Mhz Rolling Code Transmitter

Customer can code in using instruction sheet, available pre-coded for IOM customers         

(only 2 channel available)

£47 & VAT

Neo one channel transmitter

These transmitters are supplier protection coded, so coding must be checked for compatibility

Available pre-coded for IOM Gates

All of the above are discontinued case styles, directly replaceable by new versions

Novoferm 2 channel transmitter

Customer can code in with instruction leaflet

Novoferm 4 chanel transmitter

Customer can code in with instruction leaflet

Micro version of the 2 channel transmitter

Customer can code in with instruction leaflet

SecuroSmart Remote Transmitter

Can be coded in by customer using instruction sheet, as long as they already have one working remote, otherwise needs engineer to attend

£53.10 & VAT

Multi-Channel Remote Transmitter, needs to be programmed in by engineer

£63.00

Universal Cloning Transmitter

Will copy from Many working 286-868 Mhz transmitters, bring your existing transmitter to the office to check for compatibility

£40 & Vat

Universal Cloning Transmitter

Will copy from any working 433Mhz dip switch type transmitter

V2 handtransmitter.  Clonable from an existing transmitter using equipment in the office (note, for non IOM customers, you would need to check the security coding number)

£40 & VAT

V2 TRR2 Transmitter

Dipswitch transmitter customer can code in

BATTERY TYPE

A

BATTERY TYPE

B

(Transmitters need a pair of batteries)

£5.53 & vat

BATTERY TYPE

C

£2.98 & vat

BATTERY TYPE

D

(fits very early V2 transmitters)

GP11A 6 volt

BATTERY TYPE

E

(fits very early Novoferm Micro transmitters)

BATTERY TYPE

F

£2.98 & vat

BATTERY TYPE

G

Fit old black sws transmitters, which req a set of five

£2.12 & Vat  each

£9.36 & Vat set of 5

Radio Upgrade Package

Installation of new V2 radio gear to existing operator, inclusive of one transmitter, and fitting

Radio Upgrade Transmitter

Occasional models require transformer in addition to radio upgrade, such as Hormann GTD 50

Marantec Radio Upgrade 413Mhz to 868Mhz

Installation of marantec upgrade to existing operator, inclusive of one transmitter, and fitting

Cigarette Lighter Transmitter Upgrade

If you don’t already use blue button Hormann Transmitters, your door opener can be upgraded to use these innovative transmitters

Upgrade with one transmitter   £160 & Vat

Domino keypad

Installation of Keyless digital entry system is a simple and secure way to open and close your garage door without the need for a key or remote control - compatible with all garage door operators

£110 & VAT

When fitted at the same time as a new garage door, or automatic opener

Garage Door Indicator

Wireless garage door monitor, to check you, or your family haven’t left your automatic door open by accident

 (70m range)

Supply only             £63.00 & Vat

Silicone Lubricant Spray

Ideal for maintaining rollers and tracks on your garage door